Heeft u een vraag of wilt u dit product bestellen? Neem dan contact met ons op.

The amplifier is one of the most important components in a pulse processing system for applications in counting, timing, or pulse- amplitude (energy) spectroscopy. Normally, it is the amplifier that provides the pulse-shaping controls needed to optimize the performance of the analog electronics. Figure 1 shows typical amplifier usage in the various categories of pulse processing.
When the best resolution is needed in energy or pulse-height spectroscopy, a linear pulse-shaping amplifier is the right solution, as illustrated in Fig. 1(a). Such systems can acquire spectra at data rates up to 7,000 counts/s with no loss of resolution, or up to 86,000 counts/s with some compromise in resolution.
The linear pulse-shaping amplifier can also be used in simple pulse-counting applications, as depicted in Fig. 1(b). Amplifier output pulse widths range from 3 to 70 µs, depending on the selected shaping time constant. This width sets the dead time for counting events when utilizing an SCA, counter, and timer. To maintain dead time losses <10%, the counting rate is typically limited to <33,000 counts/s for the 3-µs pulse widths and proportionately lower if longer pulse widths have been selected.
Some detectors, such as photomultiplier tubes, produce a large enough output signal that the system shown in Fig. 1(d) can be used to count at a much higher rate. The pulse at the output of the fast timing amplifier usually has a width less than 20 ns. Consequently, maximum counting rates in excess of a few MHz are feasible without suffering more than 10% dead time losses.

Do you want to know more about the Amplifiers?

If you want to continue your search for additional information on this product try this link

Exclusieve distributie BeNeLux

Ortec, founded in 1960, provides state of the art solutions in many areas of nuclear / spectroscopic measurements and detection. High-technology instrumentation is designed and manufactured by Ortec a...

Downloads

Voor dit product is één download beschikbaar.

Datasheet Amplifiers - Ortec

Vul uw e-mailadres in om toegang te krijgen tot alle downloads van PEO.