Vous avez une question ou voulez-vous commander ce produit ? N’hésitez pas à nous contacter.
The Detective-X Trans-SPEC Edition is an all-inclusive, stand-alone gamma spectrometer that is easily integrated with computer-based spectroscopy applications such as MAESTRO-Pro (included), GammaVision, Isotopic, and others through WiFi, Wired Ethernet, and USB connections.
This instrument is an extension of the Detective-X platform which includes a large high purity germanium detector in a small package with much longer battery life, shorter cooldown time, and better connectivity options than any of its Trans-SPEC predecessors.
The new Trans-SPEC app is also now included with all other Detective-X models along with the Detective-X, Sleuth, and RAPiD apps so these instruments can easily be used as a standard spectrometer system in addition to their traditional use as the « Gold Standard » Radio-Isotope Identification Device (RIID).
The DETECTIVE-X-TS is a portable, all-inclusive, high resolution gamma spectrometer for in-situ measurements.
Radiation Detector / Cooler
| Crystal | P-type high-purity germanium (HPGe). Coaxial construction. Nominally 65 mm diameter x 50 mm length. |
| Relative Efficiency | ≥40% typical (ANSI/IEEE 325-1996). |
| Resolution | ≤1600 eV @ 122 keV and ≤2.3 keV @ 1332 keV (FWHM Warranted at optimum settings). |
| Peak Shape | 1.9 typical (FWTM/FWHM). |
| Cryostat and Cooler | “Hardened” cryostat, with high-reliability, low-power Stirling cooler. The cryostat design is such that the unit may be switched off at any time and power subsequently re-applied without having to wait for a full thermal cycle (full warm up before cool down). This feature greatly increases system availability during measurement campaigns. |
| Cool Down Time | The high-reliability cooler is designed for continuous operation. Between making measurements the unit is powered from a DC supply, car battery or other device. Initial cool down time depends on ambient temperature, but is typically 6 hours at 25°C. |
Digital MCA and Data Processor
| Digital Low Frequency Noise Suppression | « LFR Filter ». |
| Conversion Gain | Up to 16k channels. |
| Display | 4.3” WQVGA (480 x 272 pixels) sunlight readable, touch sensitive, operate with finger or stylus. |
| Data Processor | FREESCALE I.MX535 operating at 1 GHz. |
| Data Storage Media | Internal RAM and removable low profile USB Flash drive. The unit is shipped with a USB Flash drive which can store over 100,000 spectra. |
| File Format | ORTEC CHN and SPC spectrum formats. |
| Computer and Device Interfacing | USB, Ethernet TCP/IP v4 connections via standard RJ45 Ethernet connection (10/100 Mbps, auto-sensing), Wi-Fi (IEEE 802.11a/b/g/e/i/h/j standards and IEEE 802.11n with protected access protocols including WPA and WPA2). Mobile MCB Server enables remote control through ORTEC CONNECTIONS-based applications, such as MAESTRO, GammaVision, etc.. Wisemo is used for device application mirroring and control. |
Physical
| Maximum Overall Dimensions | (including handle and Ge detector endcap) 15.5 in L x 6.25 in W x 8.25 in H (39.5 cm L x 16 cm W x 21 cm H). |
| Weight | 15.4 lbs (6.98 kg). |
| Internal Battery | 2 Rechargeable Lithium Ion. 98 Wh each, nominal. Approximately 8 hours of battery life at 25°C when HPGe detector is cold. <4 hour time to charge. Internal battery is easily swapped. |
| External Battery | Battery lifetime may be extended indefinitely by the use of optional external battery packs. An external military battery (Model 2590) weighs less than 3.25 lbs and extends lifetime to >16 hrs. |
| Input Power | 12 to 17 V DC from battery or DC power supply (universal mains supply included). |
| Power Usage | Highest during cool down and charging battery: <100 Watt. Cold with fully charged battery <35 W. |
| Operation Range | Temperature: –20°C to 50°C. Relative Humidity: 95% non-condensing. |
| Instrument Enclosure | IP65 Sealed against ingress of dust and water. All perforations are sealed by rubber plugs (connectors, memory cards, etc.). |
APPLICATION FEATURES
The DETECTIVE-X-TS is a portable, all-inclusive, high resolution gamma spectrometer for in-situ measurements. It can be used as a stand-alone instrument to collect spectra in the field or controlled by a computer connected via USB, Ethernet, or Wi-Fi using applications such as MAESTRO-Pro (included), GammaVision, Isotopic, and others.
The DETECTIVE-X-TS is physically identical to the popular DETECTIVE-X Radioisotope Identifier which is considered the “Gold Standard” for Mission Critical Detection and Identification. Similar to ORTEC’s legacy TRANS-SPEC-100T and MICRO-TRANS-SPEC instruments, the DETECTIVE-X-TS is specifically intended for use as a more economical portable high resolution gamma spectrometer for field measurements rather than an automatic isotopic identifier. The DETECTIVE-X-TS model includes warranted resolution performance and MCA Emulation software, but excludes the Isotopic Identification applications included with the other DETECTIVE-X models (Detective X, RAPiD, and Sleuth). The DETECTIVE-X-TS can be upgraded to the DETECTIVE-X 3 MeV and 8 MeV models along with a current Dose Rate calibration.
Il y a 2 téléchargements disponibles pour ce produit.
Detective X-TS Ortec Datasheet
Detective X-TS Ortec Manual
Entrez votre adresse e-mail pour avoir accès à tous les téléchargements PEO.
